Home Practice
For learners and parents For teachers and schools
Full catalogue
Learners Leaderboard Classes/Grades Leaderboard Schools Leaderboard
Pricing Support
Help centre Contact us
Log in

We think you are located in United States. Is this correct?

2.6 Physics in action: Impulse

2.6 Physics in action: Impulse (ESCJM)

A very important application of impulse is improving safety and reducing injuries. In many cases, an object needs to be brought to rest from a certain initial velocity. This means there is a certain specified change in momentum. If the time during which the momentum changes can be increased then the force that must be applied will be less and so it will cause less damage. This is the principle behind arrestor beds for trucks, airbags, and bending your knees when you jump off a chair and land on the ground.

Air-bags in motor vehicles (ESCJN)

Air bags are used in motor vehicles because they are able to reduce the effect of the force experienced by a person during an accident. Air bags extend the time required to stop the momentum of the driver and passenger. During a collision, the motion of the driver and passenger carries them towards the windshield. If they are stopped by a collision with the windshield, it would result in a large force exerted over a short time in order to bring them to a stop. If instead of hitting the windshield, the driver and passenger hit an air bag, then the time of the impact is increased. Increasing the time of the impact results in a decrease in the force.

\begin{align*} F& = \frac{\Delta p}{\Delta t} \end{align*}

Therefore if t is increased, for a constant change in momentum, the force on the body is reduced.

Padding as protection during sports (ESCJP)

The same principle explains why wicket keepers in cricket use padded gloves or why there are padded mats in gymnastics. In cricket, when the wicket keeper catches the ball, the padding is slightly compressible, thus reducing the effect of the force on the wicket keepers hands. Similarly, if a gymnast falls, the padding compresses and reduces the effect of the force on the gymnast's body.

Arrestor beds for trucks (ESCJQ)

An arrestor bed is a patch of ground that is softer than the road. Trucks use these when they have to make an emergency stop. When a trucks reaches an arrestor bed the time interval over which the momentum is changed is increased. This decreases the force and causes the truck to slow down.

Follow-through in sports (ESCJR)

In sports where rackets and bats are used, like tennis, cricket, squash, badminton and baseball, the hitter is often encouraged to follow-through when striking the ball. High speed films of the collisions between bats/rackets and balls have shown that following through increases the time over which the collision between the racket/bat and ball occurs. This increase in the time of the collision causes an increase in the velocity change of the ball. This means that a hitter can cause the ball to leave the racket/bat faster by following through. In these sports, returning the ball with a higher velocity often increases the chances of success.

Crumple zones in cars (ESCJS)

Another safety application of trying to reduce the force experienced is in crumple zones in cars. When two cars have a collision, two things can happen:

  1. the cars bounce off each other, or

  2. the cars crumple together.

Which situation is more dangerous for the occupants of the cars? When cars bounce off each other, or rebound, there is a larger change in momentum and therefore a larger impulse. A larger impulse means that a greater force is experienced by the occupants of the cars. When cars crumple together, there is a smaller change in momentum and therefore a smaller impulse. The smaller impulse means that the occupants of the cars experience a smaller force. Car manufacturers use this idea and design crumple zones into cars, such that the car has a greater chance of crumpling than rebounding in a collision. Also, when the car crumples, the change in the car's momentum happens over a longer time. Both these effects result in a smaller force on the occupants of the car, thereby increasing their chances of survival.

Egg Throw

This activity demonstrates the effect of impulse and how it is used to improve safety. Have two learners hold up a bed sheet or large piece of fabric. Then toss an egg at the sheet. The egg should not break, because the collision between the egg and the bed sheet lasts over an extended period of time since the bed sheet has some give in it. By increasing the time of the collision, the force of the impact is minimised. Take care to aim at the sheet, because if you miss the sheet, you will definitely break the egg and have to clean up the mess!

Textbook Exercise 2.6

A cannon, mass \(\text{500}\) \(\text{kg}\), fires a shell, mass \(\text{1}\) \(\text{kg}\), horizontally to the right at \(\text{500}\) \(\text{m·s$^{-1}$}\). What is the magnitude and direction of the initial recoil velocity of the canon?

We treat the system as an isolated system and conserve momentum. We choose to the right to be the positive direction. The initial velocity of the system is zero.

Momentum conservation means that \(\vec{p}_{Ti} = \vec{p}_{Tf}\):

\begin{align*} \vec{p}_{Ti} &= \vec{p}_{Tf} \\ 0 &= m_{cannon}\vec{v}_{cf} + m_{shell}\vec{v}_{sf} \\ 0 &= (500)\vec{v}_{cf} + (1)(+500) \\ -(500)\vec{v}_{cf} &= (1)(+500) \\ \vec{v}_{cf} &= \frac{500}{-500} \\ \vec{v}_{cf} &= -1 \\ \vec{v}_{cf} &= \text{1}\text{ m·s$^{-1}$}~\text{towards the left} \end{align*}

The canon recoils at \(\text{1}\) \(\text{m·s$^{-1}$}\) towards the left.

A trolley of mass \(\text{1}\) \(\text{kg}\) is moving with a speed of \(\text{3}\) \(\text{m·s$^{-1}$}\). A block of wood, mass \(\text{0,5}\) \(\text{kg}\), is dropped vertically into the trolley. Immediately after the collision, the speed of the trolley and block is \(\text{2}\) \(\text{m·s$^{-1}$}\). By way of calculation, show whether momentum is conserved in the collision.

We calculate the momentum of the system before and after the collision.

Before the collision the velocity of the block is 0. The momentum is:

\(\vec{p}_{i} = m_{1}\vec{v}_1 + m_{2}\vec{v}_2 = 0 + (\text{1})(\text{3}) = \text{3}\text{ kg·m·s$^{-1}$}\)

After the collision the momentum is:

\(\vec{p}_{f} = (m_1 + m_2)\vec{v} = (\text{1} + \text{0,5})(\text{2}) = \text{3}\text{ kg·m·s$^{-1}$}\)

Since the momentum before the collision is the same as the momentum after the collision, momentum is conserved.

A \(\text{7 200}\) \(\text{kg}\) empty railway truck is stationary. A fertiliser firm loads \(\text{10 800}\) \(\text{kg}\) fertiliser into the truck. A second, identical, empty truck is moving at \(\text{10}\) \(\text{m·s$^{-1}$}\) when it collides with the loaded truck.

If the empty truck stops completely immediately after the collision, use a conservation law to calculate the velocity of the loaded truck immediately after the collision.

We will take to the left as positive.

We can use the law of conservation of momentum.

\begin{align*} m_{1}v_{i1} + m_{2}v_{i2} & = m_{1}v_{f1} + m_{2}v_{f2} \\ (\text{18 000})(0) + (\text{7 200})(\text{10}) & = (\text{18 000})v_{f1} + (\text{7 200})(\text{0}) \\ v_{f1} & = \text{4}\text{ m·s$^{-1}$} \text{ to the left} \end{align*}

Calculate the distance that the loaded truck moves after collision, if a constant frictional force of \(\text{24}\) \(\text{kN}\) acts on the truck.

From the force we can get the acceleration:

\begin{align*} F & = ma \\ \text{24} \times \text{10}^{\text{3}} & = \text{18 000}a \\ a & = \text{1,33}\text{ m·s$^{-2}$} \end{align*}

Now we can use the equations of motion to find the distance.

\begin{align*} \vec{v}_{f}^2 &= \vec{v}_{i}^2 + 2a\Delta x \\ \text{0} & = \text{4}^{2} + \text{2}(\text{1,33})(\Delta x) \\ \Delta x & = \text{6,02}\text{ m} \text{ to the left} \end{align*}

A child drops a squash ball of mass \(\text{0,05}\) \(\text{kg}\). The ball strikes the ground with a velocity of \(\text{4}\) \(\text{m·s$^{-1}$}\) and rebounds with a velocity of \(\text{3}\) \(\text{m·s$^{-1}$}\). Considering only the squash ball, does the law of conservation of momentum apply to this situation? Explain.

The principle of conservation of linear momentum states:

"The total linear momentum of an isolated system is constant. An isolated system has no forces acting on it from the outside."

This means that in an isolated system the total momentum before a collision or explosion is equal to the total momentum after the collision or explosion. Taking downwards as positive.

The momentum before the ball hits the floor is:

\begin{align*} \vec{p}_{down} & = m\vec{v}_i \\ & = (\text{0,05})(+4) \\ & = (\text{0,2}) \\ & = \text{0,2}\text{ kg·m·s$^{-1}$}~\text{downwards} \end{align*}

The momentum after the ball hits the floor is:

\begin{align*} \vec{p}_{up} & = m\vec{v}_f \\ & = (\text{0,05})(-3) \\ & = (\text{0,15}) \\ & = \text{0,15}\text{ kg·m·s$^{-1}$}~\text{upwards} \end{align*}

Since the momentum before the ball hits the floor is not equal to the momentum after the ball hits the floor the law of conservation of momentum does not apply to this situation.

We say that the system is not isolated and that there is a force acting on the ball from outside the system.

A bullet of mass \(\text{50}\) \(\text{g}\) travelling horizontally at \(\text{600}\) \(\text{m·s$^{-1}$}\) strikes a stationary wooden block of mass \(\text{2}\) \(\text{kg}\) resting on a smooth horizontal surface. The bullet gets stuck in the block.

Name and state the principle which can be applied to find the speed of the block-and-bullet system after the bullet entered the block.

Conservation of momentum

Calculate the speed of the bullet-and-block system immediately after impact.

\begin{align*} m_{1}v_{i1} + m_{2}v_{i2} & = (m_{1} + m_{2})v_{f} \\ (\text{0,05})(600) + (\text{2})(\text{0}) & = (\text{0,05} + \text{2})v_{f} \\ v_{f} & = \text{14,63}\text{ m·s$^{-1}$} \end{align*}

If the time of impact was \(\text{5} \times \text{10}^{-\text{4}}\) \(\text{s}\), calculate the force that the bullet exerts on the block during impact.

Calculate the change in momentum of the bullet:

\begin{align*} \Delta \vec{p}_{bullet} &= m(\vec{v}_{f}-\vec{v}_{i}) \\ & = \text{0,05}(\text{14,63} - \text{600}) \\ & = -\text{29,27}\text{ kg·m·s$^{-1}$} \end{align*}

The bullet's change in momentum is equal and opposite to the impulse on the block:

\begin{align*} \text{impulse} & = \vec{F}\Delta t \\ \vec{F} &= \frac{\text{29,27}}{\text{5} \times \text{10}^{-\text{4}}} \\ \vec{F} &= \text{58 540}\text{ N} \end{align*} \(\vec{F} = \text{58 540}\text{ N}\)