Home Practice
For learners and parents For teachers and schools
Textbooks
Full catalogue
Leaderboards
Learners Leaderboard Classes/Grades Leaderboard Schools Leaderboard
Pricing Support
Help centre Contact us
Log in

We think you are located in United States. Is this correct?

4.3 IUPAC naming and formulae

4.3 IUPAC naming and formulae (ESCKG)

What is IUPAC naming? (ESCKH)

In order to give compounds a name, certain rules must be followed. When naming organic compounds, the IUPAC (International Union of Pure and Applied Chemistry) nomenclature (naming scheme) is used. This is to give consistency to the names. It also enables every compound to have a unique name, which is not possible with the common names used (for example in industry). We will first look at some of the steps that need to be followed when naming a compound, and then try to apply these rules to some specific examples.

A good general rule to follow is to start at the end (the suffix) and work backwards (from right to left) in the name.

Molecules can contain both double or triple bonds and other functional groups (e.g. an alkene and an alcohol functional group in one molecule - propenol). However, all molecules explored in this book will contain only single carbon-carbon bonds when combined with other functional groups.

  1. Recognise the functional group in the compound. This will determine the suffix of the name (see Table 4.5).

    Functional group

    suffix

    alkane

    -ane

    alkene

    -ene

    alkyne

    -yne

    alcohol

    -ol

    aldehyde

    -al

    ketone

    -one

    carboxylic acid

    -oic acid

    ester

    -oate

    Table 4.5: The suffix associated with various functional groups.

  2. Find the longest continuous carbon chain that contains the functional group (it won't always be a straight chain) and count the number of carbon atoms in this chain. This number will determine the prefix (the beginning) of the compound's name (see Table 4.6).

    Carbon atoms

    prefix

    1

    meth-

    2

    eth-

    3

    prop-

    4

    but-

    5

    pent-

    6

    hex-

    7

    hept-

    8

    oct-

    9

    non-

    10

    dec-

    Table 4.6: The prefix of a compound's name is determined by the number of carbon atoms in the longest chain that contains the functional group.

  3. Number the carbons in the longest carbon chain (Important: If the molecule is not an alkane (i.e. has a functional group) you need to start numbering so that the functional group is on the carbon with the lowest possible number). Start with the carbon at the end closest to the functional group.

  4. Look for any branched groups:

    • Name them by counting the number of carbon atoms in the branched group and referring to Table 4.6, these groups will all end in -yl.
    • Note the position of the group on the main carbon chain. If there is more than one of the same type of branched group then both numbers must be listed (e.g. 2,4 -) and one of the prefixes listed in Table 4.7 must be used. Important: If the molecule is an alkane the branched group must be on the carbon with the lowest possible number.
    • The branched groups must be listed before the name of the main chain in alphabetical order (ignoring di/tri/tetra).

    If there are no branched groups this step can be ignored.

    Number

    prefix

    2

    di-

    3

    tri-

    4

    tetra-

    Table 4.7: Prefixes for multiple substituents with the same name. These apply to multiple functional groups as well.

  5. For the alkyl halides the halogen atom is treated in much the same way as branched groups:

    • To name them take the name of the halogen atom (e.g. iodine) and replace the -ine with -o (e.g. iodo).

      Halogen

      name

      fluorine

      fluoro

      chlorine

      chloro

      bromine

      bromo

      iodine

      iodo

      Table 4.8: Naming halogen atoms in organic molecules.

    • Give the halogen atom a number to show its position on the carbon chain. If there is more than one halogen atom the numbers should be listed and a prefix should be used (e.g. 3,4-diiodo- or 1,2,2-trichloro-). See Table 4.7 for a list of the prefixes.
    • The halogen atoms must be listed before the name of the main chain in alphabetical order (ignore di/tri/tetra).

    If there are no halogen atoms this step can be ignored.

  6. Combine the elements of the name into a single word in the following order:

    • branched groups/halogen atoms in alphabetical order (ignoring prefixes)
    • prefix of main chain
    • name ending according to the functional group and its position on the longest carbon chain.
temp text

Naming hydrocarbons (ESCKJ)

Naming alkanes

The suffix for an alkane is -ane.

Worked example 1: Naming the alkanes

Give the IUPAC name for the following compound:

80395c3902f8e70c591aef8236fb6b15.png

Note: The numbers attached to the carbon atoms would not normally be shown. The carbon atoms have been numbered to help you to name the compound.

Identify the functional group

The compound is a hydrocarbon with single bonds between the carbon atoms. It is an alkane and will have a suffix of -ane.

Find the longest carbon chain

There are four carbon atoms in the longest chain. The prefix of the compound will be but-.

Number the carbon atoms in the longest chain

The numbering has been done for you here.

Look for any branched group, name them and give their position on the carbon chain

There are no branched groups in this compound.

Combine the elements of the name into a single word

The name of the compound is butane.

Worked example 2: Naming the alkanes

Give the IUPAC name for the following compound:

ba59a239737798c0f878804b82267889.png

Identify the functional group

The compound is a hydrocarbon with single bonds between the carbon atoms. It is an alkane and will have the suffix -ane.

Find the longest carbon chain

There are three carbon atoms in the longest chain. The prefix for this compound is prop-.

Number the carbons in the carbon chain

If we start at the carbon on the left, we can number the atoms as shown in red (left). If we start at the carbon on the right, we can number the atoms as shown in blue (right).

acbec4687a18a4900fe95e18eda12f63.png

Look for any branched groups, name them and give their position on the carbon chain

There is a branched group attached to the second carbon atom. In this case the methyl group is on carbon 2 regardless of which side you number the longest chain from.

This group has the formula \(\text{CH}_{3}\), which is methane without a hydrogen atom. However, because it is not part of the main chain, it is given the suffix -yl (i.e. methyl). The position of the methyl group comes just before its name (see the next step).

Combine the elements of the compound's name into a single word in the order of branched group; prefix; name ending according to the functional group

The compound's name is 2-methylpropane.

Worked example 3: Naming the alkanes

Give the IUPAC name for the following compound:

\(\text{CH}_{3}\text{CH}(\text{CH}_{3})\text{CH}(\text{CH}_{3})\text{CH}_{3}\)

(Remember that the side groups are shown in brackets after the carbon atom to which they are attached).

Draw the structural formula from its condensed structural formula

The structural formula of the compound is:

e5b360a765d3074b052f0e22b8a8b288.png

Identify the functional group

The compound is a hydrocarbon with single bonds between the carbon atoms. It is an alkane and will have the suffix -ane.

Find the longest carbon chain

There are four carbon atoms in the longest chain. The prefix for this compound is but-.

Number the carbons in the carbon chain

If we start at the carbon on the left, we can number the atoms as shown in red (left). If we start at the carbon on the right, we can number the atoms as shown in blue (right).

8e1cc6374f337321f0036bfae4bb8cb8.png

Look for any branched groups, name them and give their position on the carbon chain

There are two methyl groups attached to the main chain. The first one is attached to the second carbon atom and the second methyl group is attached to the third carbon atom. Notice that in this example it does not matter how you have chosen to number the carbons in the main chain; the methyl groups are still attached to the second and third carbon atoms and so the naming of the compound is not affected.

This group will be 2,3-dimethyl-

Combine the elements of the compound's name into a single word in the order of branched groups; prefix; name ending according to the functional group

The compound's name is 2,3-dimethylbutane.

Worked example 4: Naming the alkanes

Give the IUPAC name for the following compound:

ac615b893ea53fe3782f7f185e71b0a6.png

Identify the functional group

The compound is a hydrocarbon with single bonds between the carbon atoms. It is an alkane and will have the suffix -ane.

Find the longest carbon chain and number the carbons in the longest chain

6acf41dc43b701802d2f3e095fa73c11.png

There are six carbons in the longest chain if they are numbered as shown in red (on the left). There are only five carbon atoms if they are numbered as shown in blue (right). Therefore, the red numbering (on the left) is correct and the prefix for the compound is hex-.

Look for any branched groups, name them and give their position on the carbon chain

cbef5690b2165aa3c79ce8a313f621d1.png

There is one methyl group attached to the main chain. If we number as shown in red (on the left) the methyl is attached to the fourth carbon atom. If we number as shown in blue (on the right) the methyl is attached to the third carbon atom.

After functional groups, the branched groups should have the lowest numbers possible. Therefore the blue numbering (on the right) is correct. The methyl is attached to the third carbon atom (3-methyl).

Combine the elements of the compound's name into a single word in the order of branched groups; prefix; name ending according to the functional group

The compound's name is 3-methylhexane.

Worked example 5: Naming the alkanes

Draw the semi-structural structural and condensed structural formula for the organic compound 2,2,4-trimethylhexane

Identify the functional group

The name ends in -ane therefore the compound is an alkane.

Determine the number of carbon atoms in the longest chain

The longest chain has the prefix hex-. There are therefore 6 carbon atoms in the longest chain.

81704d56013528b674b04a064a570cdf.png

Look for any branched groups and place them on the structure

The compound is 2,2,4-trimethylhexane. Therefore there are three branched groups. Two on carbon 2 and one on carbon 4.

7c8f65075f88be55b105c686d2e71466.png

Combine this information and add the hydrogen atoms

Carbon atoms can have four single bonds. Therefore wherever a carbon atom has less than four bonds draw in hydrogen atoms until there are four bonds.

3cacbe210442c7e9457f716f5ca96859.png

Condense the structural formula

First condense the main chain: \(\text{CH}_{3}\text{CCH}_{2}\text{CHCH}_{2}\text{CH}_{3}\)

Then add the side chains (in brackets) on the relevant carbon atoms:

\(\text{CH}_{3}\text{C}(\text{CH}_{3})_{2}\text{CH}_{2}\text{CH}(\text{CH}_{3})\text{CH}_{2}\text{CH}_{3}\)

Naming alkanes

Textbook Exercise 4.8

Give the structural formula for each of the following alkanes

Octane

The suffix -ane tells us that this is an alkane. The prefix oct- tells us that there are eight carbon atoms in the longest chain.

639d1a991eba0ac9c1769ec1437a26a5.png

Propane

The suffix -ane tells us that this is an alkane. The prefix prop- tells us that there are three carbon atoms in the longest chain.

77ba14e026c9e1d1ab4725bbf9319215.png

2-methylpropane

The suffix -ane tells us that this is an alkane. The prefix prop- tells us that there are three carbon atoms in the longest chain. 2-methyl tells us that there is a methyl (\(\text{CH}_{3}-\)) branched group attached to the second carbon atom.

64846cc38b0c0382d36bbdd623d752ab.png

3-ethylpentane

The suffix -ane tells us that this is an alkane. The prefix pent- tells us that there are five carbon atoms in the longest chain. 3-ethyl tells us that there is an ethyl branched group (\(\text{CH}_{3}\text{CH}_{2}-\)) group attached to the third carbon atom.

31eaae9d24ccb072ea16a1d581104a27.png

Give the IUPAC name for each of the following alkanes:

\(\text{CH}_{3}\text{CH}_{2}\text{CH}(\text{CH}_{3})\text{CH}_{2}\text{CH}_{3}\)

This is hard to do unless you draw the structural formula of the molecule out. It is recommended that you do this in exams.

e3e35aaf31bd265048ca7df68441a51e.png

There are five carbons in the longest chain so the prefix is pent-. There are only single carbon-carbon bonds and no other functional group so the compound is an alkane and the suffix is -ane. There is one methyl group at position 3 (you can number from either end of the chain for this example). So the compound is 3-methylpentane.

\(\text{CH}_{3}\text{CH}(\text{CH}_{3})\text{CH}_{2}\text{CH}(\text{CH}_{3})\text{CH}_{3}\)

This is hard to do unless you draw the structural formula of the molecule out. It is recommended that you do this in exams.

adb4312bb14d597ba2c72eb3b7afbbbf.png

There are five carbons in the longest chain, so the prefix is pent-. There are only single carbon-carbon bonds so the compound is an alkane and the suffix is -ane. There is one methyl group at position 2 and one at position 4 (once again you can number from either end). So the compound is

2,4-dimethylpentane.

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}_{3}\)

This is hard to do unless you draw the structural formula of the molecule out. It is recommended that you do this in exams.

6db84b52f43ed86aac386c6873dc9e0a.png

There are six carbon atoms in the longest chain so the prefix is hex-. There are only single carbon-carbon bonds and no other functional group so the compound is an alkane and the suffix is -ane. There are no branched groups, so the molecule is hexane.

\(\text{CH}_{3}\text{CH}_{3}\)

This is hard to do unless you draw the structural formula of the molecule out. It is recommended that you do this in exams.

8d44d854c9a2c4387e2c31fb0c42bb18.png

There are two carbon atoms in the longest chain so the prefix is eth-. There are only single carbon-carbon bonds and no other functional group so the compound is an alkane and the suffix is -ane. There are no branched groups, so the molecule is ethane.

c32a890e974d4ad6856ea03de3273675.png

There are four carbon atoms in the longest chain, so the prefix is but-. There are two methyl branches at positions 2 and 3. The functional group is an alkane, so the suffix is -ane. Combining all this information we get: 2,3-dimethylbutane. Note that in this example it does not matter which end you start numbering from.

5d3673bf71b013f71f21df475316ec0e.png

There are four carbon atoms in the longest chain so the prefix is but-. The functional group is an alkane, so the suffix is -ane. There is one branched group which is a methyl group and this is at position 2. The molecule is 2-methylbutane.

Note that in this example it does matter which way you number the chain as the branched group needs to have the lowest number possible and so the compound is not 3-methylbutane.

Naming alkenes

The suffix for an alkene is -ene.

Worked example 6: Naming the alkenes

Give the IUPAC name for the following compound:

9f22b6187e66daae1895cff8c7503f77.png

Identify the functional group

The compound has a double carbon-carbon bond and is an alkene. It will have the suffix -ene.

Find the longest carbon chain containing the functional group

The functional group is a double bond, so the longest chain must contain the double bond. There are four carbon atoms in the longest chain and so the prefix for this compound will be but-.

Number the carbon atoms

Remember that the carbon atoms must be numbered so that the functional group is at the lowest numbered carbon atom possible. In this case, it doesn't matter whether we number the carbons from the left to right, or from the right to left. The double bond will still fall between the second and third carbon atoms.

Look for any branched groups, name them and give their position on the carbon chain

There are no branched groups in this molecule.

Combine the elements of the name into a single word in the following order: branched groups; prefix; name ending according to the functional group and its position along the longest carbon chain

The name of this compound is but-2-ene or 2-butene.

Worked example 7: Naming the alkenes

Draw the structural and molecular formula for the organic compound

3-methylbut-1-ene

Identify the functional group

The suffix -ene means that this compound is an alkene and there must be a double bond in the molecule. The number 1 immediately before the suffix means that the double bond must be at the first carbon in the chain (but-1-ene).

Determine the number of carbon atoms in the longest chain containing the functional group

The prefix for the compound is but- so there must be four carbons in the longest chain containing the double bond.

4b6deb6b104b6a0420a1291783c69206.png

Look for any branched groups

There is a methyl group at the third carbon atom in the chain. Count from the left so that the double bond carbon is the first carbon atom.

ab5f8e15c6f30781973c773825e398b3.png

Combine this information and add the hydrogen atoms

0a1ad77eba14d6f68fe38adb431529b7.png

Reduce the structural formula to the molecular formula

There are 5 carbon atoms and 10 hydrogen atoms so the molecular formula is \(\text{C}_{5}\text{H}_{10}\).

(Remember that there is no structural information given by the molecular formula)

Worked example 8: Naming the alkenes

Give the IUPAC name for the following compound:

57240b68151dcf3bf17827481980eb65.png

Identify the functional group

The compound is an alkene and will have the suffix -ene. There is a double bond between the first and second carbons and also between the third and fourth carbons. The organic compound therefore contains '1,3-diene'.

Find the longest carbon chain containing the functional group, and number the carbon atoms

Remember that the main carbon chain must contain both the double bonds. There are four carbon atoms in the longest chain containing the double bonds and so the prefix for this compound will be but-. The carbon atoms are already numbered 1 to 4 in the diagram.

Look for any branched groups, name them and give their position on the carbon chain

There is an ethyl group on the second carbon.

Note that if we had numbered from the right to left the suffix would still have been 1,3-diene, however the ethyl group would have been on the third carbon. So we had to number left to right.

Combine the elements of the name into a single word in the following order: branched groups; prefix; name ending according to the functional group and its position along the longest carbon chain

The name of this compound is 2-ethylbut-1,3-diene.

Naming alkenes

Textbook Exercise 4.9

Give the IUPAC name for each of the following alkenes:

\(\text{CH}_{2}\text{CHCH}_{2}\text{CH}_{2}\text{CH}_{3}\)

Draw the structural representation:

b2d5f34831955b79c7e1d46167c53953.png

The molecule contains a double carbon-carbon bond. It is an alkene and so the suffix is -ene. There are five carbons in the longest chain, so the prefix is pent-. There are no branched groups. The double bond occurs between carbons 1 and 2. So the molecule is 1-pentene or pent-1-ene.

Note that the way you number the carbon atoms matters here, the molecule is not pent-4-ene.

\(\text{CH}_{3}\text{CHCHCH}_{3}\)

Draw the structural representation:

e8c589a7a32e8098c0943ca5b9808fad.png

The molecule contains a double carbon-carbon bond. It is an alkene and so the suffix is -ene. There are four carbons in the longest chain so the prefix is but-. There are no branched groups. The double bond occurs between carbons 2 and 3. The molecule is 2-butene or but-2-ene.

368913a0adacf35aac0af3608e00e6ca.png

The compound contains two double carbon-carbon bonds. It is an alkene and so the suffix is -diene. There are four carbons in the longest chain containing the double bonds, so the prefix is but-. There are no branched chains. The first double bond occurs between carbons 1 and 2. The second double bond occurs between carbons 3 and 4. The compound is but-1,3-diene.

Give the structural formula for each of the following alkenes:

ethene

The prefix eth- tells us there are two carbon atoms in the chain. The suffix -ene tells us there is a double bond between these carbon atoms.

476afe0559dac7eb99ffefbcc7f8372b.png

hex-1-ene

The prefix hex- tells us there are six carbon atoms in the chain. The suffix -1-ene tells us there is a double bond between the first and second carbon atoms.

3d955f60a33fd0c4e92292f8e5099a9b.png

hept-3-ene

The prefix hept- tells us there are seven carbon atoms in the chain. The suffix -3-ene tells us there is a double bond between the third and fourth carbon atoms.

a04baa28fe6437d0ca4a5e0632b1fc96.png

4-ethyloct-3-ene

The prefix oct- tells us there are eight carbon atoms in the longest chain containing the functional group. The suffix -3-ene tells us there is a double bond between the third and fourth carbon atoms. 4-ethyl tells us that there is an ethyl (\(\text{CH}_{3}\text{CH}_{2}-\)) branched group attached to the fourth carbon atom.

5840ff6f0105ea2514779ea1915a804c.png

Naming alkynes

The suffix for an alkyne is -yne.

Worked example 9: Naming the alkynes

Give the IUPAC name for the following compound:

db82d803933c9ce287e52454c5490960.png

Identify the functional group

There is a triple bond between two of the carbon atoms, so this compound is an alkyne. The suffix will be -yne.

Find the longest carbon chain containing the functional group

The functional group is a triple bond, so the longest chain must contain the triple bond. There are six carbon atoms in the longest chain. The prefix of the compound's name will be hex-.

Number the carbons in the longest chain

In this example, you will need to number the carbons from right to left so that the triple bond is between carbon atoms with the lowest numbers (the suffix for the compound will therefore be -2-yne).

c049d97b39c64933a84972e7544c6cd6.png

Look for any branched groups, name them and assign the number of the carbon atom to which the group is attached

There is a methyl (\(\text{CH}_{3}\)) group attached to the fifth carbon (remember we have numbered the carbon atoms from right to left).

Combine the elements of the name into a single word in the following order: branched groups; prefix; name ending according to the functional group and its position along the longest carbon chain

If we follow this order, the name of the compound is 5-methylhex-2-yne.

Worked example 10: Naming the alkynes

Give the IUPAC name for the following compound:

39e35a6cc6c3fc8dc8021499fdefdc3c.png

Identify the functional group

There are two triple bonds. The suffix will therefore be -diyne.

Find the longest carbon chain containing the functional group

The functional group is a triple bond, so the longest chain must contain all triple bonds. The longest carbon chain contains seven carbon atoms, therefore the prefix will be hept-.

Number the carbons in the longest chain

3217e254f868306a8b6533bc72e3b684.png

Numbering from left to right (shown in red) the first triple bond is on carbon 1 and the second is on carbon 5. The suffix will therefore be -1,5-diyne.

(Numbering from right to left (shown in blue) will give the suffix -2,6-diyne, and is incorrect).

Look for any branched groups

There are no branched groups for this molecule.

Combine the elements of the name into a single word in the following order: branched groups; prefix; name ending according to the functional group and its position along the longest carbon chain

The name of the compound is hept-1,5-diyne.

Worked example 11: Naming the alkynes

Draw the structural and condensed structural formula for the organic compound

6-methylhept-3-yne

Identify the functional group

The suffix -3-yne means that this compound is an alkyne and there must be a triple bond located on carbon number 3.

Determine the number of carbon atoms in the longest chain containing the functional group

The prefix for the compound is hept- so there must be seven carbons in the longest chain.

a805e5dc3b1104fb7f3f7db77a552b6d.png

Look for any branched groups

There is a methyl group located on carbon number 6.

1928db9a88c6a7d81dfc43793b377b98.png

Combine this information and add the hydrogen atoms

ce56a802b854607d10523a2f2c3fbce0.png

Condense the structural formula

First condense the main chain: \(\text{CH}_{3}\text{CH}_{2}\text{CCCH}_{2}\text{CHCH}_{3}\)

Then add the side chains (in brackets) on the relevant carbon atoms:

\(\text{CH}_{3}\text{CH}_{2}\text{CCCH}_{2}\text{CH}(\text{CH}_{3})\text{CH}_{3}\)

Naming alkynes

Textbook Exercise 4.10

Give the structural formula for each of the following alkynes:

ethyne

The prefix eth- tells us there are two carbon atoms in the longest chain. The suffix -yne tells us there is a triple bond between the carbon atoms.

80399a8bb01993a6ee96a0e09d209181.png

pent-1-yne

The prefix pent- tells us there are five carbon atoms in the longest chain. The suffix -1-yne tells us there is a triple bond between the first and second carbon atoms.

bb2a52cc3b99734e28f4d7108ec3202d.png

5-methylhept-3-yne

The prefix hept- tells us there are seven carbon atoms in the longest chain. The suffix -3-yne tells us there is a triple bond between the third and fourth carbon atoms. 5-methyl tells us there is a methyl branched chain on the fifth carbon atom.

6d254dbd7e612bca847540ad7217721b.png

Give the IUPAC names for the following alkynes:

a77670ad5b4279c7d6820f78c8b96ed4.png

There is a triple carbon-carbon bond. This compound is an alkyne and will have the suffix -yne. There are six carbon atoms in the longest chain, therefore the prefix will be hex-. The triple bond is between the third and fourth carbon atoms regardless of how you number the chain (-3-yne). There are two branched methyl groups. Depending on the order of numbering they are either on the fourth carbon atom (left to right) or the second carbon atom (right to left). The lower numbering is correct (right to left) and as there are two methyl groups this is 2,2-dimethyl. The molecule is 2,2-dimethylhex-3-yne.

49cc9ad6bb87881dcaa45c95f033f4d7.png

There is a triple carbon-carbon bond. This compound is an alkyne and will have the suffix -yne. There are three carbon atoms in the longest chain, therefore the prefix will be prop-. The triple bond is between the first and second carbon atoms (numbering from the left) making the suffix -1-yne. There are no branched groups. This molecule is prop-1-yne or propyne.

\(\text{CH}_{3}\text{CCCH}_{3}\)

Draw the structure:

28f31ffafe458c829ae766753fc42742.png

There is a triple carbon-carbon bond. This compound is an alkyne and will have the suffix -yne. There are four carbon atoms in the longest chain, therefore the prefix will be but-. The triple bond is between the second and third carbon atoms regardless of how you number the chain (-2-yne). There are no branched groups. This molecule is but-2-yne or 2-butyne.

Model kits are a great way to help learners understand and visualise organic molecules. If you do not have access to model kits however, substitutes can be used. A bag of jelly tots (or a similar soft sweet) would work just as well, using toothpicks to represent the bonds. It is also possible to make your own playdough (which can be coloured for different atoms using food colourants). A recipe is given here:

  • 2 cups flour, 2 cups warm water, 1 cup salt, 2 tablespoons vegetable oil, 1 tablespoon of cream of tartar (this improves elasticity, and is optional).

  • Mix all the ingredients together over a low heat and stir continually.

  • When the dough pulls away from the sides of the pot, remove it from the heat and allow to cool.

  • If your dough is still sticky just cook it a bit longer.

  • Once cool, knead the dough until it becomes smooth, then separate and add food colourant, different colours for different types of atoms.

  • The dough is ready. Remember to store it in an airtight container between uses. If it dries out a bit, knead in a bit of water.

The full process is provided on www.instructables.com. This playdough can be used for all the model building activities.

Be careful to keep the playdough away from animals, as it is edible, but contains large amounts of salt.

Building hydrocarbons

An example of ethane, ethene and ethyne built with atomic model kits is given in the picture below:

c51f8583366c7382d652c26c05d8350e.png
  1. Using atomic model kits, build the molecules of methane, propane, butane, pentane and octane. If you don't have atomic model kits, jelly tots (or playdough) and toothpicks will work just as well. Use one colour jelly tot for the carbon atoms and one for the hydrogen atoms.

    • Remember that carbon atoms should have four bonds and hydrogen atoms can have only one. You should see that all these compounds have a similar formula, remember they all have the general formula \(\text{C}_{\text{n}}\text{H}_{2\text{n}+2}\).
    • What is the name of the homologous series that all these molecules belong to?
  2. Build the molecules of prop-1-ene, but-1-ene, pent-1-ene and oct-1-ene. Use two toothpicks to represent a double bond. You should see that all these compounds have a similar formula. Remember, they all have the general formula \(\text{C}_{\text{n}}\text{H}_{2\text{n}}\).

    • Try placing the double bond at different positions within the molecule. Does this make any difference to the total number of carbon and hydrogen atoms in the molecule?
    • What is the name of the homologous series that all these molecules belong to?
  3. Build the molecules of prop-1-yne, but-1-yne, pent-1-yne and oct-1-yne. Use three toothpicks to represent a triple bond. You should see that all these compounds have a similar formula. Remember, they are all alkynes.

    • Try placing the triple bond at different positions within the molecule. Does this make any difference to the total number of carbon and hydrogen atoms in the molecule?
    • What is the general formula for the alkynes?

Naming hydrocarbons

Textbook Exercise 4.11

Give the structural formula for each of the following compounds:

oct-2-ene

The prefix oct- tells us there are eight carbon atoms in the longest chain. The suffix -2-ene tells us there is a double bond between the second and third carbon atoms.

bea7e804b93ff260d2fc07bccabf1b88.png

3-methylhexane

The prefix hex- tells us there are six carbon atoms in the longest chain. The suffix -ane tells us this is an alkane and that there are only single carbon-carbon bonds and no other functional groups. 3-methyl tells us there is a branched methyl group on the third carbon atom.

16fa6ed98082ccfb4941ff24974b308d.png

hept-3-yne

The prefix hept- tells us there are seven carbon atoms in the longest chain. The suffix -3-yne tells us that this is an alkyne and there is a triple bond between the third and fourth carbon atoms.

53e36b63dc07c04e0b775f5e8135183f.png

4-ethyl-4-methylhept-2-yne

The prefix hept- tells us there are seven carbon atoms in the longest chain. The suffix -2-yne tells us this is an alkyne and there is a triple bond between the second and third carbon atoms. The 4-ethyl tells us there is an ethyl (\(\text{CH}_{3}\text{CH}_{2}-\)) branched group on the fourth carbon atom. The 4-methyl tells us there is a methyl (\(\text{CH}_{3}-\)) branched group on the fourth carbon atom.

b902a229c7aa2269da82734098d78e2b.png

pentane

The prefix pent- tells us there are five carbon atoms in the longest chain. The suffix -ane tells us this is an alkane.

52879bcec8729913c0d3e69b9f1b88d8.png

2-methylbut-1-ene

The prefix but- tells us there are four carbon atoms in the longest chain containing the functional group. The suffix -1-ene tells us that this is an alkene and there is a double bond between the first and second carbon atoms. 2-methyl tells us that there is a methyl (\(\text{CH}_{3}-\) group attached to the second carbon atom.

b961b1294ea151e1aab0b25a92c286b3.png

propyne

The prefix prop- tells us there are three carbon atoms in the longest chain. The suffix -yne tells us there is a triple carbon-carbon bond between the first and second carbon atoms.

b777154db6223594e2b573e017d3a7ba.png

Give the IUPAC name for each of the following organic compounds:

98b64b791732f9eb383fd62792f6b7b2.png

The compound has a double carbon-carbon bond and no other functional groups. Therefore it is an alkene and the suffix is -ene. There are five carbon atoms in the longest chain and so the prefix is pent-. There are no branched groups. The double bond occurs between carbons 2 and 3. The compound is 2-pentene or pent-2-ene.

Note that the way we number the carbon atoms matters. The double bond is given the lowest possible number and so this compound is not pent-3-ene.

5f505f6e9c19440006616b3a2c2292f4.png

There is a double carbon-carbon bond, therefore the compound is an alkene and the suffix is -ene. There are four carbon atoms in the main chain (the longest chain containing the functional group) so the prefix is but-. There is an ethyl group on the second carbon atom. The double bond occurs between carbons 1 and 2. The compound is therefore 2-ethylbut-1-ene .

Remember that you have to have the functional group in the main chain so the compound is not a substituted pentane.

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}_{3}\)

Draw the structural representation:

6db84b52f43ed86aac386c6873dc9e0a.png

There are only single carbon-carbon bonds in this compound and no other functional groups, therefore it is an alkane and the suffix is -ane. There are six carbon atoms in the longest chain so the prefix is hex-. There are no branched groups in this compound. This molecule is hexane.

\(\text{CH}_{3}\text{CH}_{2}\text{CCH}\)

Draw the structural representation of the compound:

6b95e99dfc110afe7c60c90a04cd066b.png

The compound has a triple carbon-carbon bond, therefore it is an alkyne and the suffix is -yne. There are four carbon atoms in the longest chain so the prefix is but-. There are no branched chains. The double bond occurs between the first and second carbon atoms. The compound is therefore but-1-yne or butyne.

Note that the way we number the carbon atoms matters. The double bond is given the lowest possible number and so this compound is not but-3-yne.

696b21dc78dd34a7cf09ef7acb20b0a2.png

There are only single bonds in this compound and no other functional groups, therefore it is an alkane and the suffix is -ane. There is one carbon atom in the longest chain so the prefix is meth-. There are no branched groups in this compound. This molecule is methane.

\(\text{C}_{2}\text{H}_{2}\)

Draw the structural representation of the compound:

5abbf83bd7177da1278e6b2aafc62918.png

The compound has a triple carbon-carbon bond, therefore it is an alkyne and the suffix is -yne. There are two carbon atoms in the longest chain so the prefix is eth-. There are no branched chains. There are only two carbon atoms, so the triple bond has to be between them. The compound is ethyne.

\(\text{CH}_{3}\text{CHCH}_{2}\)

Draw the structural representation of the compound:

76ecec31fc6b9c468b81524330af17c5.png

The compound has a double carbon-carbon bond, therefore it is an alkene and the suffix is -ene. There are three carbon atoms in the longest chain so the prefix is prop-. There are no branched chains. The double bond occurs between the first and second carbon atoms. The compound is propene.

Note that the way we number the carbon atoms matters. The double bond is given the lowest possible number and so this compound is not prop-2-ene. Also, we do not include the 1 in the name as this is the only position that the double bond can occur in propene.

Naming alkyl halides (ESCKK)

All the same rules apply when naming the alkyl halides as for naming the hydrocarbons. We will only be dealing with the haloalkanes (i.e. there are no other functional groups). The halogen atom is treated in the same way as a branched group.

Worked example 12: Naming the haloalkanes

Give the IUPAC name for the following compound:

c75682f8380f1c0bd567b289c9898f04.png

Identify the functional group

There is a halogen atom and no other functional group. This compound is therefore a haloalkane, and will have the suffix -ane.

Find the longest carbon chain containing the functional group

There are three carbons in the longest chain containing the halogen atom. The prefix is prop-.

Number the carbon atoms in the longest chain

You need to number the carbon atoms so that the halogen atom is on the carbon atom with the lowest number. In this case you can number from either side.

Name the halogen atom and assign the number for the carbon atom it is attached to

The halogen is a chlorine atom. It is attached to carbon number 2 and so will have the name 2-chloro.

Look for branched groups

There are no branched groups in this compound.

Combine the elements of the name into a single word in the following order: halogen atoms; prefix; name ending according to functional group

The name of the compound is 2-chloropropane.

Worked example 13: Naming the haloalkanes

Give the IUPAC name for the following compound:

790539b1484ef1621420eec9d7d7c1cb.png

Identify the functional group

There are three halogen atoms and no other functional groups. This compound is therefore a haloalkane, and will have the suffix -ane.

Find the longest carbon chain containing the functional group

There are four carbons in the longest chain containing all the halogen atoms. The prefix for this compound will be but-.

Number the carbon atoms in the longest chain

You need to number the carbon atoms so that the halogen atoms are on the carbon atoms with the lowest numbers. You must number from left to right here so that one halogen atom is on carbon 1 and two halogen atoms are on carbon 3.

Name the halogen atoms and assign the number for the carbon atom attached to it

There are two halogen atoms that are bromine atoms and one that is fluorine. One bromine is attached to carbon 1 and one is attached to carbon 3. The fluorine atom is attached to carbon 3. So you have 1,3-dibromo- and 3-fluoro.

Look for branched groups

There are no branched groups in this compound.

Combine the elements of the name into a single word in the following order: halogen atoms in alphabetical order; prefix; name ending according to functional group

The name of the compound is 1,3-dibromo-3-fluorobutane. Note that we place the halogens in alphabetical order: bromo (ignore the di/tri/tetra) is before fluoro.

Worked example 14: Naming the haloalkanes

Draw the structural and condensed structural formula for the organic compound

2-iodo-3-methylpentane

Identify the functional group

This compound has the suffix -ane, but also contains a halogen atom. It is therefore a haloalkane. Note that the methyl and iodo are written in alphabetical order.

Find the longest carbon chain containing the functional group

The prefix is pent- therefore there are 5 carbons in the longest chain.

27c1b0a1b3b57f1d5715ac72d0a2acba.png

Place the halogen atom(s) and any branched groups

There is an iodine atom on the second carbon atom, and a methyl branched group on the third carbon atom.

ef8ceb55cc47442859c1e4cc56cf4046.png

Combine this information to and add the hydrogen atoms

67182ec30a32534c6c0a4b8ca336189a.png

Condense the structural formula

First condense the main chain: \(\text{CH}_{3}\text{CHCHCH}_{2}\text{CH}_{3}\)

Then add the side chains and halogen atoms (in brackets) on the relevant carbon atoms: \(\text{CH}_{3}\text{CH}(\text{I})\text{CH}(\text{CH}_{3})\text{CH}_{2}\text{CH}_{3}\)

Naming haloalkanes

Textbook Exercise 4.12

Give the structural representation for the following haloalkanes:

2-chlorobutane

The but- tells us that there are four carbon atoms in the longest chain. The -ane tells us there are only single carbon-carbon bonds. The 2-chloro means there is a chlorine atom attached to the second carbon atom.

8982162100dc78506a1dbd991da4a1a2.png

1-bromopropane

The prop- tells us that there are three carbon atoms in the longest chain. The -ane tells us there are only single carbon-carbon bonds. The 1-bromo means there is a bromine atom attached to the first carbon atom.

5149793c08f508b84273fae357f811ee.png

2,3-difluoropentane

The pent- tells us there are five carbon atoms in the longest chain. The -ane tells us there are only single carbon-carbon bonds. The 2,3-difluoro means there are two fluorine atoms, one attached to carbon 2 and the other attached to carbon 3.

fc6375f2fd045e2c59967823c76444f4.png

Give the IUPAC name for the following haloalkanes:

024c68ca093bc3a64a28534a9688c8b4.png

There is a halogen atom and only single carbon-carbon bonds, therefore this is a haloalkane and the suffix is -ane. There are three carbon atoms in the longest chain, therefore the prefix is prop-. There is an iodine atom attached to the second carbon atom (2-iodo). There are no branched groups. Therefore this molecule is 2-iodopropane.

\(\text{CH}_{3}\text{CH}(\text{Br})\text{CH}(\text{CH}_{3})\text{CH}_{2}\text{CH}_{2}\text{CH}_{3}\)

Draw the structural representation:

3dda745ce7ddd864f060b7166d2575a1.png

There is a halogen atom and only single carbon-carbon bonds, therefore this is a haloalkane and the suffix is -ane. There are six carbon atoms in the longest chain, therefore the prefix is hex-. There is a bromine atom attached to the second carbon atom (2-bromo). There is a branched methyl group attached to the third carbon atom (3-methyl). This molecule is

2-bromo-3-methylhexane.

d49cca54b46b329d31bf85d654933c57.png

There are halogen atoms and only single carbon-carbon bonds, therefore this is a haloalkane and the suffix is -ane. There are eight carbon atoms in the longest chain, therefore the prefix is oct-. There are two chlorine atoms, one attached to the first carbon atom and one attached to the fourth carbon atom (1,4-dichloro). There are no branched groups. This molecule is 1,4-dichlorooctane.

\(\text{CH}_{2}(\text{F})\text{C}(\text{I})_{2}\text{CH}_{2}\text{CH}_{3}\)

Draw the structural representation:

e6347eedf7357698ba526d057abd9ea9.png

There are halogen atoms and only single carbon-carbon bonds, therefore this is a haloalkane and the suffix is -ane. There are four carbon atoms in the longest chain containing all the halogen atoms, therefore the prefix is but-. There is a fluorine atom attached to the first carbon atom (1-fluoro). There are two iodine atoms attached to the second carbon atom (2,2-diiodo). These must be put in alphabetical order, ignoring any prefixes on the halogen atoms. F comes before i (1-fluoro-2,2-diiodo). This molecule is 1-fluoro-2,2-diiodobutane

Naming alcohols (ESCKM)

The rules used to name the alcohols are similar to those already discussed for the hydrocarbons. The suffix of an alcohol is –ol (see Table 4.5).

Worked example 15: Naming the alcohols

Give the IUPAC name for the following organic compound

097ba7590dfb58176de0c71d9ae6b839.png

Identify the functional group

The compound has an \(-\text{OH}\) (hydroxyl) functional group and is therefore an alcohol. The compound will have the suffix -ol.

Find the longest carbon chain containing the functional group

There are three carbon atoms in the longest chain that contains the functional group. The prefix for this compound will be prop-. As there are only single bonds between the carbon atoms, the prefix includes an to become propan-.

Number the carbons in the carbon chain

In this case, it doesn't matter whether you start numbering from the left or right. The hydroxyl group will still be attached to second carbon atom (-2-ol).

Look for branched groups

There are no branched groups in this compound.

Combine the elements of the compound's name into a single word in the order of branched groups; prefix; name ending according to the functional group

The compound's name is propan-2-ol or 2-propanol.

Worked example 16: Naming the alcohols

Give the IUPAC name for the following compound:

5e193de7fb0763d308f1d0c27e66624a.png

Identify the functional group

The compound has an \(-\text{OH}\) (hydroxyl) functional group and is therefore an alcohol. There are two hydroxyl groups in the compound, so the suffix will be -diol.

Find the longest carbon chain that contains the functional group

There are four carbon atoms in the longest chain that contains the functional group (but-) and only single bonds (an-). The prefix for this compound will be butan-.

Number the carbons in the carbon chain

9c3323b2f2e876e3ec8b7a67ccac1939.png

There are two hydroxyl groups attached to the main chain. If we number as shown in red (on the left) they are attached to the first and second carbon atoms. If we number as shown in blue (on the right) they are attached to the third and fourth carbon atoms.

The functional groups should have the lowest numbers possible. Therefore the red numbering is correct. The hydroxyl groups are attached to the first and second carbon atoms (1,2-diol).

Look for branched groups

There are no branched groups in this compound.

Combine the elements of the compound's name into a single word in the order of branched groups; prefix; name ending according to the functional group

The compound's name is butan-1,2-diol.

Worked example 17: Naming the alcohols

Draw the structural and condensed structural representations for the organic compound 4-ethyloctan-2,5-diol

Identify the functional group

The compound has the suffix -ol. It is therefore an alcohol.

Find the longest carbon chain that contains the functional group

The prefix is oct- therefore there are 8 carbons in the longest chain containing the functional group.

257102b2d0a2fe28b01f7cfc66ff3e5b.png

Place the functional group as well as any branched groups

There is one \(-\text{OH}\) attached to carbon 2 and one attached to carbon 5. There is also an ethyl (\(-\text{CH}_{2}\text{CH}_{3}\)) branched group attached to carbon 4.

ce91fe1fbeeae805eff083ec9f1df78e.png

Combine this information and add the hydrogen atoms

87daf5cf011e7a8ef4555b98dc17ad03.png

Condense the structural formula

First condense the main chain: \(\text{CH}_{3}\text{CHCH}_{2}\text{CHCHCH}_{2}\text{CH}_{2}\text{CH}_{3}\)

Then add the side chains and alcohol functional groups (in brackets) on the relevant carbon atoms: \(\text{CH}_{3}\text{CH}(\text{OH})\text{CH}_{2}\text{CH}(\text{CH}_{2}\text{CH}_{3})\text{CH}(\text{OH})\text{CH}_{2}\text{CH}_{2}\text{CH}_{3}\)

Building alcohols

The structural representation of butan-1-ol built using an atomic model kit is given below:

c555c7c155e2029d05f57c204bbd7ea0.png

Using atomic model kits, build the molecules of methanol, ethanol, propan-1-ol, pentan-1-ol and octan-1-ol. If you don't have an atomic model kit remember that you can use jelly tots (or playdough) and toothpicks. Use different colour jelly tots to represent the different atoms.

  • You should see that all these compounds have a similar formula. Remember, they belong to the homologous series of the alcohols. What is the general formula for this series?

  • Try placing the hydroxyl group at different positions within the molecule. Does this make any difference to the total number of carbon, hydrogen and oxygen atoms in the molecule?

Naming alcohols

Textbook Exercise 4.13

Give the structural representation of each of the following organic compounds:

pentan-3-ol

The prefix pentan- tells us there are five carbon atoms in the longest chain and only single carbon-carbon bonds. The suffix -3-ol tells us there is a hydroxyl (\(-\text{OH}\)) group on the third carbon atom.

9998f28d473fff7b88dc209eb7a848c2.png

butan-2,3-diol

The prefix butan- tells us there are four carbon atoms in the longest chain and only single carbon-carbon bonds. The suffix -2,3-diol tells us there are two hydroxyl groups, one attached to the second carbon atom and one attached to the third carbon atom.

5bd3b2d03874aa040f3b9073437e023c.png

2-methylpropan-1-ol

The prefix propan- tells us there are three carbon atoms in the longest chain and only single carbon-carbon bonds. The suffix -1-ol tells us there is a hydroxyl group attached to the first carbon atom. 2-methyl tells us there is a methyl branched group attached to the second carbon atom.

5995cadbd99769cef47f2d7044fca1f6.png

Give the IUPAC name for each of the following:

\(\text{CH}_{3}\text{CH}_{2}\text{CH}(\text{OH})\text{CH}_{3}\)

Draw the structural representation of the compound:

a96ef57603709a84b8ccd0edaa314646.png

There is a hydroxyl group, therefore the compound is an alcohol and the suffix is -ol. There are four carbon atoms in the longest chain so the prefix is but-. There are only single carbon-carbon bonds, therefore the prefix becomes butan-. There are no branched groups. The hydroxyl group is attached to the second carbon atom. The molecule is 2-butanol or butan-2-ol.

Note that the way we number the carbon atoms matters. The hydroxyl group is given the lowest possible number and so this compound is not butan-3-ol.

3db18d056ce2d6db9342b4baa2034dff.png

There is a hydroxyl group, therefore the compound is an alcohol and the suffix is -ol. There are five carbon atoms in the longest chain so the prefix is pent-. There are only single carbon-carbon bonds, therefore the prefix becomes pentan-. There are no branched groups. The hydroxyl group is attached to the second carbon atom. The molecule is 2-pentanol or pentan-2-ol.

Note that the way we number the carbon atoms matters. The hydroxyl group is given the lowest possible number and so this compound is not pentan-4-ol.

45edcd7e7029671319a4ef65a5b56edc.png

There are two hydroxyl groups, therefore the compound is an alcohol and the suffix is -diol. There are seven carbon atoms in the longest chain so the prefix is hept-. There are only single carbon-carbon bonds, therefore the prefix becomes heptan-. The hydroxyl groups are both attached to the third carbon atom (-3,3-diol). The branched methyl chain is attached to the fourth carbon atom. The molecule is 4-methylheptan-3,3-diol.

Note that the way we number the carbon atoms matters. The hydroxyl groups are given the lowest possible numbers and so this compound is not 4-methylheptan-5,5-diol.

Naming carbonyl compounds (ESCKN)

A carbonyl group consists of a carbon atom that is bonded to an oxygen atom through a double bond (C\(=\)O). There are many different functional groups that contain a carbonyl group.

Naming aldehydes

If the carbonyl group is on the end of the carbon chain, the organic compound is called an aldehyde. An aldehyde has the suffix -al.

Worked example 18: Naming aldehydes

Give the IUPAC name and molecular formula for the following organic compound

7be3df4a041544ede6ad33c129ebe0c5.png

Identify the functional group

The compound has a C\(=\)O (carbonyl) group and no other functional groups. It is therefore either an aldehyde or a ketone. The carbonyl group is on the last (terminal) carbon in the main chain so the compound is an aldehyde. It will have the suffix -al.

Find the longest carbon chain containing the functional group

There are three carbons in the longest chain that contains the functional group. The prefix for this compound will be prop-. As there are only single bonds between the carbon atoms, the prefix becomes propan-.

Number the carbon atoms in the carbon chain

The carbon atoms will be numbered so that the carbon atom of the aldehyde group has the lowest number possible. In this case that is from right to left.

Look for any branched groups

There are no branched groups in this compound.

Combine the elements of the compound's name into a single word in the order of branched groups; prefix; name ending according to the functional group

The compound's name is propanal (there is no need to say propan-1-al as by definition all aldehydes are -1-al).

Reduce the structural representation to the molecular formula

There are 3 carbon atoms, 6 hydrogen atoms and 1 oxygen atom so the molecular formula is \(\text{C}_{3}\text{H}_{6}\text{O}\).

(Remember that there is no structural information given by the molecular formula)

temp text

Naming ketones

Ketone is pronounced keytone. Therefore propanone is pronounced propanown.

If the carbonyl group is in the middle of the carbon chain, the compound is called a ketone. A ketone has the suffix -one.

Note that butanone can only be butan-2-one. If the carbonyl group were on carbon 1 it would be an aldehyde, while if it were on carbon 3 we would simply count from the other side of the molecule. The 2 is still required for IUPAC naming however.

Worked example 19: Naming ketones

Give the IUPAC name and molecular formula for the following compound:

42edbed5034d3139ccb4653dc4e5f16d.png

Identify the functional group

The compound has a C\(=\)O (carbonyl) group and no other functional groups. It is therefore either an aldehyde or a ketone. The carbonyl group is not at the end of the chain. Therefore the compound is a ketone and the suffix will be -one.

Find the longest carbon chain containing the functional group

There are four carbons in the longest chain that contains the functional group, and only single carbon-carbon bonds. The prefix for this compound will be butan-.

Number the carbon atoms in the carbon chain

The carbon atoms will be numbered from left to right so that the carbon atom of the ketone group has the lowest number possible (-2-one).

Look for any branched groups

There are no branched groups in this compound.

Combine the elements of the compound's name into a single word in the order of branched groups; prefix, name ending according to the functional group

The compound's name is butan-2-one or 2-butanone.

Reduce the structural representation to the molecular formula

There are 4 carbon atoms, 8 hydrogen atoms and 1 oxygen atom so the molecular formula is \(\text{C}_{4}\text{H}_{8}\text{O}\).

(Remember that there is no structural information given by the molecular formula)

Worked example 20: Naming carbonyl compounds

Give the IUPAC name for the following compound:

895315b66e551a84b2beb81bf07bdb32.png

Identify the functional group

The compound has a C\(=\)O (carbonyl) group and no other functional groups. It is therefore either an aldehyde or a ketone. The carbonyl group is not at the end of the chain. Therefore the compound is a ketone and the suffix will be -one.

Find the longest carbon chain that contains the functional group

The longest carbon chain that contains the functional group has four carbon atoms in it, and only single bonds. The prefix for this compound will be butan-.

Number the carbon atoms in the carbon chain

The carbon atoms will be numbered from left to right so that the carbon atom of the ketone functional group has the lowest possible number. The suffix will be -2-one.

Look for any branched groups

There is a branched group on carbon 3. This group has only one carbon atom. The branched group is attached to the third carbon atom (3-methyl).

Combine the elements of the compound's name into a single word in the order of branched groups; prefix; name ending according to the functional group

The compound's name is 3-methylbutan-2-one.

Worked example 21: Naming carbonyl compounds

Draw the structural and condensed structural representations for the organic compound 3-methylpentanal.

Identify the functional group

The compound has the suffix -al. It is therefore an aldehyde and has a C\(=\)O (carbonyl) group on the first carbon atom.

Find the longest carbon chain that contains the functional group

The prefix is pent- so there are 5 carbon atoms in the longest chain.

27c1b0a1b3b57f1d5715ac72d0a2acba.png

Place the functional group as well as any branched groups

There is a C\(=\)O (carbonyl) group at the first carbon atom and a methyl group attached to the third carbon atom (3-methyl).

22aaa42f32d36b19061e8e88345ce29f.png

Combine this information and add the hydrogen atoms

517ed495d655afc5007f8cc9cfa2159b.png

Condense the structural representation

First condense the main chain including the carbonyl group oxygen atom: \(\text{CHOCH}_{2}\text{CHCH}_{2}\text{CH}_{3}\)

Then add the side chains on the relevant carbon atoms: \(\text{CHOCH}_{2}\text{CH}(\text{CH}_{3})\text{CH}_{2}\text{CH}_{3}\)

Worked example 22: Naming carbonyl compounds

Draw the structural and condensed structural representations for the organic compound 3-methylpentan-2-one.

Identify the functional group

The compound has the suffix -one. It is therefore a ketone and has a C\(=\)O (carbonyl) group. This group cannot be on the first carbon atom.

Find the longest carbon chain that contains the functional group

The prefix is pent- therefore there are 5 carbon atoms in the longest chain.

27c1b0a1b3b57f1d5715ac72d0a2acba.png

Place the functional group as well as any branched groups

There is a C\(=\)O (carbonyl) group at the second carbon atom (-2-one) and a methyl group attached to the third carbon atom (3-methyl).

08da302a52da9d90c561284fbe105cd2.png

Combine this information and add the hydrogen atoms

c8ef100c93c2c284d8a2cfd44b59fa7d.png

Condense the structural representation

First condense the main chain including the carbonyl group oxygen atom: \(\text{CH}_{3}\text{COCHCH}_{2}\text{CH}_{3}\)

Then add the side chains on the relevant carbon atoms: \(\text{CH}_{3}\text{COCH}(\text{CH}_{3})\text{CH}_{2}\text{CH}_{3}\)

Naming aldehydes and ketones

Textbook Exercise 4.14

Give the IUPAC name for each of the following compounds:

d446b050825556302d040094eaaffaf2.png

The compound has a carbonyl group and no other functional groups. Therefore it is either an aldehyde or a ketone. The carbonyl group carbon atom is the last (terminal) carbon atom. Therefore this is an aldehyde and the suffix is -al. There are five carbon atoms in the longest chain, therefore the prefix is pentan-. This molecule is pentanal.

Note that no number is needed for the position of the aldehyde. We must number the chain so that the carbonyl group is always the first carbon atom.

b026f3d8ac022ddc2bb104fbc7f780da.png

The compound has a carbonyl group and no other functional groups. Therefore it is either an aldehyde or a ketone. The carbonyl group carbon atom is not the last carbon atom. Therefore this is a ketone and the suffix is -one. There are four carbon atoms in the longest chain, therefore the prefix is butan-. This molecule is butan-2-one or 2-butanone.

Note that the way we number the carbon atoms is important. This compound is not butan-3-one.

abbd336978a03d7f983ff3636e8f7bfa.png

The compound has a carbonyl group and no other functional groups. Therefore it is either an aldehyde or a ketone. The carbonyl group carbon atom is a terminal carbon atom. Therefore this is an aldehyde and the suffix is -al. There are six carbon atoms in the longest chain, therefore the prefix is hexan-. This molecule is hexanal.

Note that no number is needed for the position of the aldehyde. We must number the chain so that the carbonyl group is always the first carbon atom.

\(\text{HCHO}\)

Draw the structural representation:

e944132cbcd845e69e10675b591c75e8.png

The compound has a carbonyl group and no other functional groups. Therefore it is either an aldehyde or a ketone. The carbonyl group carbon atom is at the end of the chain. Therefore this is an aldehyde and the suffix is -al. There is one carbon atom in the longest chain, therefore the prefix is methan-. This molecule is methanal.

\(\text{CH}_{3}\text{CH}_{2}\text{COCH}_{2}\text{CH}_{3}\)

Draw the structural representation:

0e20a70f45a5db7f4c9f2cdbcc3a5d36.png

The compound has a carbonyl group and no other functional groups. Therefore it is either an aldehyde or a ketone. The carbonyl group carbon atom is the third carbon atom. Therefore this is a ketone and the suffix is -3-one. There are five carbon atoms in the longest chain, therefore the prefix is pentan-. This molecule is pentan-3-one or 3-pentanone.

Give the structural representation for the following:

ethanal

The prefix eth- tells us that there are two carbon atoms in the longest chain. The suffix -al tells us that the first (or last) carbon atom is part of a carbonyl group.

d282b16f6b9f2cf2ac806dd342eeee45.png

propanone

The prefix prop- tells us that there are three carbon atoms in the longest carbon chain. The suffix -one tells us that there is a carbonyl group and it is not on the end of the chain. There is only one carbon atom not on the end: the second carbon atom.

737bcbd9509ffc34050fb967d7129b4c.png

heptan-3-one

The prefix hept- tells us there are seven carbon atoms in the longest chain. The suffix -3-one tells us that the third carbon atom is part of a carbonyl group.

99fe2c99a948c6a1137bfa7083671989.png

Naming carboxylic acids

Carboxylic acids are characterised by having a carboxyl group, which has the formula \(-\text{COOH}\). In a carboxyl group a carbon atom is double-bonded to an oxygen atom (a carbonyl group), and is also bonded to a hydroxyl (alcohol) group. The IUPAC suffix for a carboxylic acid is -oic acid.

Worked example 23: Naming carboxylic acids

Give the IUPAC name and molecular formula for the following compound:

8a5a1002f7826906f8e8c49ba5e03666.png

Identify the functional group

The compound has a \(-\text{COOH}\) group and is therefore a carboxylic acid. The suffix will be -oic acid.

Find the longest carbon chain that contains the functional group

There are five carbon atoms in the longest chain that contains the functional group, and only single bonds between carbon atoms. The prefix for this compound is pentan-.

Number the carbon atoms in the carbon chain

The carbon atoms will be numbered from right to left so that the carboxylic acid functional group has the lowest numbered carbon atom.

Look for any branched groups

There are no branched groups in this compound.

Combine the elements of the compound's name into a single word in the order of branched groups; prefix, name ending according to the functional group

The compound's name is pentanoic acid.

Reduce the structural representation to the molecular formula

There are 5 carbon atoms, 10 hydrogen atoms and 2 oxygen atoms so the molecular formula is \(\text{C}_{5}\text{H}_{10}\text{O}_{2}\).

Worked example 24: Naming carboxylic acids

Draw the structural and condensed structural representations for the organic compound 2-ethylhexanoic acid.

Identify the functional group

The compound has the suffix -oic acid. It is therefore a carboxylic acid and has a \(-\text{COOH}\) group. This group can only be on carbon 1 (at the end of the carbon chain).

Find the longest carbon chain that contains the functional group

The prefix is hex- therefore there are 6 carbons in the longest chain.

81704d56013528b674b04a064a570cdf.png

Place the functional group as well as any branched groups

The \(-\text{COOH}\) group contains the first carbon atom. The ethyl group is attached to the second carbon atom.

f6983ef5efa74632a9cbaff09c5a98d7.png

Remember that the main carbon chain must contain the functional group. This is hexanoic acid and not a substituted heptane.

Combine this information and add the hydrogen atoms

368332c3e34c46a94a8b0ef520588ec9.png

Condense the structural representation

First condense the main chain, including the \(-\text{COOH}\) functional group:

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CHCOOH}\)

Then add the side chains (in brackets) on the relevant carbon atoms:

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}(\text{CH}_{2}\text{CH}_{3})\text{COOH}\)

Building carboxylic acids

Using atomic model kits build the molecules of methanoic acid, ethanoic acid, butanoic acid, pentanoic acid and octanoic acid. If you don't have an atomic model kit remember that you can use jelly tots (or playdough) and toothpicks. Use different colour jelly tots to represent the different atoms and two toothpicks to represent double bonds.

  • You should see that all these compounds have a similar formula. Remember, they belong to the carboxylic acid homologous series. What is the general formula for this series?

  • Remember that carbon must have four bonds, oxygen must have two bonds and hydrogen can only have one bond. Thinking about this fact, is it possible to have the carboxylic acid (\(-\text{COOH}\)) group in a position other than the last (or first) carbon atom?

Naming carboxylic acids

Textbook Exercise 4.15

Give the structural representation for the following:

pentanoic acid

The prefix pent- tells us that there are five carbon atoms in the longest chain. The suffix -oic acid tells us that this is a carboxylic acid (\(-\)COOH).

e51c95b9a1f6367f13e630df0bab408e.png

4-ethyl-7-methyloctanoic acid

The prefix oct- tells us that there are eight carbon atoms in the longest chain. The suffix -oic acid tells us that this is a carboxylic acid (\(-\)COOH). 4-ethyl means that there is an ethyl branched group (\(\text{CH}_{3}\text{CH}_{2}-\)) attached to the fourth carbon atom. 7-methyl means that there is a methyl branched group (\(\text{CH}_{3}-\)) attached to the seventh carbon atom. Remember to always number from the carboxylic acid side of the compound.

280baba51fd7c8a14d9acfcac58ba11b.png

4,4-diethylheptanoic acid

The prefix hept- tells us that there are seven carbon atoms in the longest chain. The suffix -oic acid tells us that this is a carboxylic acid (\(-\)COOH). 4,4-diethyl means that there are two ethyl branched groups (\(\text{CH}_{3}\text{CH}_{2}-\)) attached to the fourth carbon atom. Remember to always number from the carboxylic acid side of the compound.

010134ac666a5b0e04c5d176b3d04bc7.png

Give the IUPAC name for each of the following:

d57b925c4a1044ec89e67bcaf0ae8fa9.png

This compound contains a carbonyl group and a hydroxyl group, both attached to the same carbon atom. Therefore this is a carboxylic acid and the suffix is -oic acid. There are two carbon atoms in the longest chain, therefore the prefix is ethan-. There are no branched groups. This molecule is therefore ethanoic acid.

\(\text{CH}_{3}\text{C}(\text{CH}_{3})_{2}\text{CH}_{2}\text{CH}_{2}\text{COOH}\)

Draw the structural representation:

f5892e5270894af848ee5e9f25a38bb3.png

This compound contains a carbonyl group and a hydroxyl group, both attached to the same carbon atom. Therefore this is a carboxylic acid and the suffix is -oic acid. There are five carbon atoms in the longest chain, therefore the prefix is pentan-. There are two branched groups attached to the fourth carbon atom (remember to count from the carboxylic acid functional group). This molecule is therefore 4,4-dimethylpentanoic acid.

0aacba9e11f5b89b574e3497289a4473.png

This compound contains a carbonyl group and a hydroxyl group, both attached to the same carbon atom. Therefore this is a carboxylic acid and the suffix is -oic acid. There are three carbon atoms in the longest chain, therefore the prefix is propan-. There are no branched groups. This molecule is therefore propanoic acid.

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CH}(\text{CH}_{2}\text{CH}_{3})\text{CH}_{2}\text{CH}(\text{CH}_{2}\text{CH}_{3})\text{COOH}\)

Draw the structural representation:

5c748527778c28ae251886cbbd00dc1d.png

This compound has a carbonyl group and a hydroxyl group, both attached to the same carbon atom. Therefore this is a carboxylic acid and the suffix is -oic acid. There are seven carbon atoms in the longest chain, therefore the prefix is heptan-. There are two branched ethyl groups (\(\text{CH}_{3}\text{CH}_{2}-\)), one attached to the second carbon atom and one attached to the fourth carbon atom. This molecule is therefore 2,4-diethylheptanoic acid.

Naming esters

When an alcohol reacts with a carboxylic acid an ester is formed. A new bond is formed between the oxygen atom of the hydroxyl group and the carbonyl carbon atom of the carboxylic acid. The suffix for an ester is -oate.

dc036f99d6cf72253020ed5a8815e384_.png

Figure 4.49: The esterification process of ethanol and butanoic acid to ethyl butanoate and water.

3d69b19cdd97e3e4afa68ad5efb0340b.png

Figure 4.50: The (a) structural, (b) condensed structural and (c) molecular formula representations of ethyl butanoate. (d) An atomic model of ethyl butanoate.

Although the part of the ester from the alcohol (ethyl) is on the right, and the part from the carboxylic acid (butan-) is on the left in Figure 4.51, when naming the structure the part of the name from the alcohol is written first (ethyl butanoate). Don't forget to count the carbon atom in the carbonyl group when determining the number of carbon atoms in the chain.

a425aefe7effb5c730fcd775edb69b06.png

Figure 4.51: The (a) structural, (b) semi-structural structural and (c) condensed structural representations of \(\color{red}{\textbf{ethyl}}\color{orange}{\textbf{ butanoate}}\).

Worked example 25: Naming esters

Give the IUPAC name for the following compound:

8f5aba005a2678e580e351a01a2e7bef.png

Identify the functional group

There is a \(-\)C\(=\)O (carbonyl) group as well as an oxygen atom bonded to the carbon atom of the carbonyl and another carbon atom. This is therefore an ester and the suffix is -oate.

Determine which part is from the alcohol and which is from the carboxylic acid

An ester is a carboxylic acid derivative. Divide the molecule in two with the carbonyl group on one side and the oxygen bonded to two carbon atoms on the other.

5305370cfaf16cd0234b593a63537d63.png

The part containing the oxygen atom bonded to two different carbon atoms was formed from the alcohol and is on the left here. The part containing the carbonyl group was formed from the carboxylic acid and is on the right here.

2e325b2cd13fbc693c90920c9b1aca51.png

Number the carbon atoms on the carbon chains

There is only one carbon atom in the left-hand chain (from the alcohol). Therefore this will be methyl. There are three carbon atoms in the right-hand chain (from the carboxylic acid) therefore the prefix will be propan-.

Combine the elements of the compound's name into a single word in the order of chain from the alcohol; prefix (from chain containing carbonyl functional group), name ending according to functional group

The compound's name is methyl propanoate.

Worked example 26: Naming esters

Draw the structural and condensed structural representations for the organic compound ethyl hexanoate.

Identify the functional group

The compound has the suffix -oate. It is therefore an ester and has a \(-\)C\(=\)O (carbonyl) group as well as an oxygen atom bonded to the carbon atom of the carbonyl and another carbon atom.

Determine which part is from the alcohol and which is from the carboxylic acid

The ethyl tells us that there are two carbon atoms in the part of the chain from the alcohol. The prefix hex- tells us that there are six carbon atoms from the part of the chain from the carboxylic acid.

38bd4b4925952f71cb056d9734d95fe6.png

Place the functional group as well as any branched groups

The oxygen atom bonded to two different carbon atoms is located between the two sections. The \(-\)C\(=\)O (carbonyl) group is located at the first carbon atom of the carboxylic acid chain.

117e0dedeaba316fdfbf8376651847bc.png

Combine this information and add the hydrogen atoms

b948052e20839aa6cb334861949e3ae1.png

Condense the structural representation

Condense the part of the compound that came from the carboxylic acid first, so start from the right here: \(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{COO}\)

The first O is for the \(-\)C\(=\)O, the second is from the \(-\text{O}-\). Now condense the part that came from the alcohol, starting from the \(-\text{O}-\):

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{COOCH}_{2}\text{CH}_{3}\)

Naming esters

Textbook Exercise 4.16

Give the IUPAC name for each of the following compounds:

\(\text{CH}_{3}\text{COOCH}_{2}\text{CH}_{3}\)

Draw the structural representation:

0adf4d59fc032b474f4b91cefd4066b4.png

This compound contains a carbonyl group and an oxygen atom attached to two different carbon atoms. Therefore this is an ester and the suffix is -oate. There are two carbon atoms in the chain without the carbonyl group (from the alcohol), therefore this group is ethyl. There are two carbon atoms in the chain with the carbonyl group (from the carboxylic acid), therefore the prefix is ethan-. There are no branched groups. This molecule is therefore ethyl ethanoate.

c89d57e5fb881535b607ccae2200c4c3.png

This compound contains a carbonyl group and an oxygen atom attached to two different carbon atoms. Therefore this is an ester and the suffix is -oate. There are five carbon atoms in the chain without the carbonyl group (from the alcohol), therefore this group is pentyl. There is one carbon atom in the chain with the carbonyl group (from the carboxylic acid), therefore the prefix is methan-. There are no branched groups. This molecule is therefore pentyl methanoate.

2b0b864f9ca0061645e83190709bf7d3.png

This compound contains a carbonyl group and an oxygen atom attached to two different carbon atoms. Therefore this is an ester and the suffix is -oate. There are three carbon atoms in the chain without the carbonyl group (from the alcohol), therefore this group is propyl. There are six carbon atoms in the chain with the carbonyl group (from the carboxylic acid), therefore the prefix is hexan-. There are no branched groups. This molecule is propyl hexanoate.

Give the structural representations for the following esters:

heptyl propanoate

The suffix -oate tells us that this is an ester. The heptyl tells us that there are seven carbon atoms in the chain without the carbonyl group (from the alcohol). The prefix prop- tells us that there are three carbon atoms in the chain with the carbonyl group (from the carboyxlic acid).

899f06def9818b7e5cdf4082591eaa0c.png

methyl octanoate

The suffix -oate tells us that this is an ester. The methyl tells us that there is one carbon atom in the chain without the carbonyl group (from the alcohol). The prefix oct- tells us that there are eight carbon atoms in the chain with the carbonyl group (from the carboyxlic acid).

6fdf8f9e93b4f7d6f7b1bb9a3e41d985.png

hexyl pentanoate

The suffix -oate tells us that this is an ester. The hexyl tells us that there are six carbon atoms in the chain without the carbonyl group (from the alcohol). The prefix pent- tells us that there are five carbon atoms in the chain with the carbonyl group (from the carboxylic acid).

6ec4c2ab455c0a22b0d597d750955cb7.png

Worked example 27: Naming carbonyl compounds

Give the IUPAC name for the following compound:

\(\text{CH}_{3}\text{CH}_{2}\text{CH}(\text{CH}_{3})\text{CH}_{2}\text{CH}_{2}\)\(\color{red}{\textbf{COOH}}\)

(Remember that the side groups are shown in brackets after the carbon atom to which they are attached)

Draw the structural representation

9d68666ed59178bc621682e07268615f.png

Identify the functional group

The compound has a \(-\text{COOH}\) functional group. It is therefore a carboxylic acid and the suffix is -oic acid.

Find the longest carbon chain containing the functional group

There are six carbon atoms in the longest chain containing the functional group. The prefix for this compound is hexan-.

Number the carbon atoms in the carbon chain

The carbon atoms should be numbered from right to left so that the carboxylic acid functional group has the lowest numbered carbon atom.

Look for any branched groups, name them and give their position on the carbon chain

There is a branched group attached to the fourth carbon atom. This group has only one carbon atom and is therefore a methyl group (4-methyl).

Combine the elements of the compound's name into a single word in the order of branched groups; prefix; name ending according to the functional group

The compound's name is 4-methylhexanoic acid.

Worked example 28: Naming carbonyl compounds

Give the IUPAC name for the following compound:

\(\text{CH}_{3}\)\(\color{red}{\text{COO}}\)\(\text{CH}_{2}\text{CH}_{2}\text{CH}_{2}\text{CH}_{3}\)

Identify the functional group

The compound has a \(-\text{COO}\) functional group. It is therefore an ester and the suffix will be -oate. This can also be shown as:

3cca347fcb4e3c356c87890dcbcdcbcd.png

Determine which part is from the alcohol and which is from the carboxylic acid

The left half of the compound contains the carbonyl group and is therefore from the carboxylic acid. The right half of the compound must be from the alcohol.

54f47551adf2806ebb86817f62917285.png

Determine the number of carbon atoms in each chain

There are 2 carbon atoms in the part that contains the C\(=\)O group (from the carboyxlic acid), therefore the prefix is ethan-. There are 4 carbon atoms in part of the chain without the carbonyl group (from the alcohol), which is therefore butyl.

Look for any branched groups, name them and give their position on the carbon chain

There are no branched groups.

Combine the elements of the compound's name into a single word in the order of name of chain from the alcohol; prefix (from chain containing carbonyl functional group); suffix

The compound's name is butyl ethanoate.

Naming carbonyl compounds

Textbook Exercise 4.17

Give the structural representation for the following compounds:.

3-methylpentanal

The suffix -al tells us that the compound is an aldehyde. The prefix pent- tells us that there are five carbon atoms in the longest chain. 3-methyl tells us that there is a methyl branched group on the third carbon atom.

72e923238172bcc6bcfa403ff8b62891.png

butyl pentanoate

The suffix -oate tells us that the compound is an ester. The prefix pent- tells us that there are five carbon atoms in the chain containing the carbonyl group. Butyl tells us that there are four carbon atoms in the chain that does not contain the carbonyl group. There are no branched groups.

91ebb0dcb99f2b743e369f25045f621f.png

2-methylbutanoic acid

The suffix -oic acid tells us that the compound is a carboxylic acid. The prefix but- tells us that there are four carbon atoms in the longest chain. 2-methyl tells us that there is a branched methyl chain attached to the second carbon atom (remember to count from the carboxylic acid carbon atom).

1fa7389eaef25d4af8eae6cc34db88bd.png

octan-4-one

The suffix -4-one tells us that the compound is a ketone and that the fourth carbon atom is the carbonyl carbon atom. The prefix oct- tells us that there are eight carbon atoms in the longest chain. There are no branched chains.

2156e29908136283495b1110d58be20d.png

Give the IUPAC name for each of the following compounds:

febf0ef7e0a4e443625e132edff7e66b.png

There is a carbonyl group and it is not on the first or last carbon atom. This compound must be a ketone and have the suffix -one. There are six carbon atoms in the longest chain containing the carbonyl functional group, therefore the prefix is hexan-. The carbonyl is on the second carbon atom. There is a branched ethyl group attached to the third carbon atom. This molecule is therefore 3-ethylhexan-2-one.

Note that the way you number this compound is important. This is not 4-ethylhexan-5-one.

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{2}\text{CHO}\)

Draw the structural representation:

fe20a47f372866cbc9357739f44f0418.png

There is a carbonyl group and it is on the first/last carbon atom. This compound must be an aldehyde and have the suffix -al. There are four carbon atoms in the chain containing the carbonyl group, therefore the prefix is butan-. There are no branched chains. This molecule is butanal.

789fbdc62d9ce301f90e1d3cde5bc4c6.png

There is a carbonyl group and an oxygen atom attached to two different carbon atoms. This compound must be an ester and have the suffix -oate. There are three carbon atoms in the chain without the carbonyl group and this is propyl. There are two carbon atoms in the chain with the carbonyl group so the prefix is ethan-. There are no branched chains. This molecule is propyl ethanoate.

\(\text{HCOOH}\)

Draw the structural representation:

a51bf579a9a0986d831c7a79a1544f3c.png

There is a carbonyl group and a hydroxyl group attached to the same carbon atom. This compound must be a carboxylic acid and have the suffix -oic acid. There is one carbon atom in the longest chain therefore the prefix is methan-. There are no branched chains (there can be no branched chains). This molecule is methanoic acid.

Building molecules

Using atomic model kits build molecules of butane, but-1-ene, but-1-yne, butan-1-ol, butanoic acid, butyl butanoate, butan-2-one, butanal. If you don't have an atomic model kit remember that you can use jelly tots (or playdough) and toothpicks. Use different colour jelly tots to represent the different atoms and extra toothpicks to represent double and triple bonds.

  • Identify the functional group in each of these molecules. Move the functional group around the molecule. You should find that you can do so with but-1-ene, but-1-yne and butan-1-ol. It will not be possible with butanoic acid and there is no functional group to move in butane.

  • Can you see that if you move the carbonyl group in butan-2-one you will either still get butan-2-one or you will get butanal? Similarly, when moving the carbonyl group in butanal you can only get butanal or butan-2-one.

  • Build a model of the molecule below:

    a39ee8ae5cd9d4a194ffba641ecda6cf.png
  • Compare this to butyl butanoate. What differences are there between these two molecules? What similarities are there? What is the name of the new molecule?

  • Continue by building different compounds for your friends. Make them identify the functional group, the number of carbon atoms and therefore the name of the compound.

IUPAC naming

Textbook Exercise 4.18

Study the table below and answer the questions that follow:

A

B

C

Compound

Functional group

Number of carbon atoms

1

e.g. methane

e.g. alkane

e.g 1

2

propanoic acid

alkyne

8

3

2-chloroethane

ketone

4

4

1-octanal

carboxylic acid

6

5

3-heptyne

aldehyde

2

6

butanone

ester

6

7

3-hexene

haloalkane

1 and 5

8

1-hexanol

alkene

3

9

methyl pentanoate

alcohol

7

Match the compounds in column A with the correct functional group in column B. For example methane is an alkane: A1, B1.

A1 (methane), B1 (alkane)

A2 (propanoic acid), B4 (carboxylic acid)

A3 (2-chloroethane), B7 (haloalkane)

A4 (1-octanal), B5 (aldehyde)

A5 (3-heptyne), B2 (alkyne)

A6 (butanone), B3 (ketone)

A7 (3-hexene), B8 (alkene)

A8 (1-hexanol), B9 (alcohol)

A9 (methyl pentanoate), B6 (ester)

Match the compounds in column A with the correct number of carbon atoms in column C. For example methane has one carbon atom in its longest chain: A1, C1.

A1 (methane), C1 (1)

A2 (propanoic acid), C8 (3)

A3 (2-chloroethane), C5 (2)

A4 (1-octanal), C2 (8)

A5 (3-heptyne), C9 (7)

A6 (butanone), C3 (4)

A7 (3-hexene), C4 or C6 (6)

A8 (1-hexanol), C4 or C6 (6)

A9 (methyl pentanoate), C7 (1 and 5)

Match the structural representation in column A with the condensed structural representation (column B) and IUPAC name (column C).

A

B

C

Structure

Condensed

IUPAC name

1

3222c360f79cded27e8b3a37795efbd1.png

\(\text{CH}_{3}\text{CH}(\text{I})\text{CH}_{3}\)

ethyl methanoate

2

2dcb7e9361af507fbc60a5cfbcb37010.png

\(\text{CH}_{3}\text{CH}_{2}\text{CH}_{3}\)

propanone

3

c55b4838d94ea87ac73d4cd1024e2cc9.png

\(\text{CH}_{3}\text{COCH}_{3}\)

propane

4

ac3afcacc06097cc93676640b2874a15.png

\(\text{HCOOCH}_{2}\text{CH}_{3}\)

propyne

5

d3b8acdb5fc4080cfb4d64853f6f0a20.png

\(\text{CH}_{3}\text{CCH}\)

propanal

6

c958a937ac91c0419256b4d96e5df8c9.png

\(\text{CH}_{3}\text{CHCH}_{2}\)

2-iodopropane

7

4b4024146863c9e116cd69c315f8cdb9.png

\(\text{CH}_{3}\text{CH}_{2}\text{CHO}\)

propanoic acid

8

a349fe8cc077170a177c5e734a54d1a4.png

\(\text{CH}_{3}\text{CH}_{2}\text{COOH}\)

propene

propane - A1, B2, C3

propyne - A2, B5, C4

propanone - A3, B3, C2

propanoic acid - A4, B8, C7

2-iodopropane - A5, B1, C6

ethyl methanoate - A6, B4, C1

propene - A7, B6, C8

propanal - A8, B7, C5

Fill in the gaps in the table below:

IUPAC name

Functional

group

Condensed

Structural

\(\small{{\text{CH}}_{3}{\text{CH}}_{2}{\text{CH}}_{2}{\text{CHO}}}\)

fe20a47f372866cbc9357739f44f0418.png

ethanol

25ee5ad26e7f7d4ec9482cecd48e2df0.png

carboxylic

acid

\(\small{{\text{CH}}_{3}{\text{CH}}_{2}{\text{CH(CH}}_{3}{\text{)CH}}_{2}{\text{COOH}}}\)

2-methyl

pent-2-ene

\(\small{{\text{CH}}_{3}{\text{C(CH}}_{3}{\text{)CHCH}}_{2}{\text{CH}}_{3}}\)

alkane

643c93e3a886973f6db0dfdb483cd180.png

ester

\(\small{{\text{CH}}_{3}{\text{COOCH}}_{2}{\text{CH}}_{2}{\text{CH}}_{3}}\)

butanone

ketone

1-pentyne

a9761d4f635bec522979596cb1b55427.png

alkyl

halide

\(\small{{\text{CH}}_{2}{\text{(Cl)CH}}_{2}{\text{CH}}_{3}}\)

IUPAC name

Functional

group

Condensed

Structural

butanal

aldehyde

\(\small{{\text{CH}}_{3}{\text{CH}}_{2}{\text{CH}}_{2}{\text{CHO}}}\)

fe20a47f372866cbc9357739f44f0418.png

ethanol

alcohol

\(\small{{\text{CH}}_{3}{\text{CH}}_{2}{\text{OH}}}\)

25ee5ad26e7f7d4ec9482cecd48e2df0.png

3-methyl

pentanoic acid

carboxylic

acid

\(\small{{\text{CH}}_{3}{\text{CH}}_{2}{\text{CH(CH}}_{3}{\text{)CH}}_{2}{\text{COOH}}}\)

2d66cfcbb2cb8c3eab5d0ec4c6470fe4.png

2-methyl

pent-2-ene

alkene

\(\small{{\text{CH}}_{3}{\text{C(CH}}_{3}{\text{)CHCH}}_{2}{\text{CH}}_{3}}\)

fd48cdbb8b5ad82635c8c3c785f8912b.png

2-methyl

propane

alkane

\(\small{{\text{CH}}_{3}{\text{CH(CH}}_{3}{\text{)CH}}_{3}}\)

d784cd03850c9abf5b38120c0ee0b610.png

propyl

ethanoate

ester

\(\small{{\text{CH}}_{3}{\text{COOCH}}_{2}{\text{CH}}_{2}{\text{CH}}_{3}}\)

3b4d2b1de1d64b5b61ba40e8c2ba74de.png

butanone

ketone

\(\small{{\text{CH}}_{3}{\text{COCH}}_{2}{\text{CH}}_{3}}\)

f545cb060538f96bf1b244c630452c09.png

1-pentyne

alkyne

\(\small{{\text{CHCCH}}_{2}{\text{CH}}_{2}{\text{CH}}_{3}}\)

2b111409248919d48a42b8e886e8b1f1.png

1-chloro

propane

halo

alkane

\(\small{{\text{CH}}_{2}{\text{(Cl)CH}}_{2}{\text{CH}}_{3}}\)

f58529053afccf0c198be68d89db2256.png